Macrofab Engineering Podcast

Podcast Notes Parker and Stephen have been working on the Super Simple Power Supply. Parker has the test panel done and working. See Figure 1. Stephen has the Analog "Energon Cube" PCB made. See Figure 2. Should be working by next weeks podcast. The datasheet for the VFD display Parker is using has an ambiguous pinout for the serial interface. Part number CU16025-UW6J. Parker had to bridge some wires to fix the problem. The entire front panel for the SSPS will draw roughly 60W of power. Will have to have its own transformer inside to power it. Stephen is writing a series of BGA footprint and layout articles. Check out the first one. Another datasheet rant. This time about the FX Dev boards breadboards. There was a critical dimension that was 1mm off. 1.54mm VS 2.54mm. See Figure 3. Parker has been working on USB Type C. Will be writing a couple articles in the future about his findings. Parker made a test dev board to experiment on the Type C connector. Intersel made a really interesting buck boost battery