Macrofab Engineering Podcast

MEP EP#322: Measuring up Your Interview QuestionsPrevious Podcast where we discussed Engineering Resumes MEP EP#279: Avoiding The HR Pit of Doom, Resume and Interview Tricks for Engineers Interviewer Questions and Techniques? Stephen Schematic PDF for the test There is no output when a 10Vp-p signal is injected into the input. Turning the pot or applying a voltage to the input cv jack does not have any effect on the output. It is stuck at zero volts. Alternate – What if the output was stuck at + or – 11V? The output is stuck at unity gain. 10VPP in results in 10VPP out. The pot and CV controls do nothing to adjust the output level. The unit seems to work for all controls other than the CV offset input. That seems to only be unipolar. Positive voltage does not have an effect but negative voltage does. Hint: The output of U5.1 with zero volts in is reading zero volts. Bonus – What is the input range for the cv input if the microprocessor has an input range of 3.3V? The unit turns on and